DRX9200 PROFESSIONAL IRD RECEIVER
DVB-S / S2, H264 (HD / SD), MPEG 1/2/4 compatible,
SCPC / MCPC support,
BISS Mode-1, Mode-E,
Common Interface (CI), RDS data output,
2x16 character LCD Display,
Front Panel Keypad,
POWER, LOCK and ALARM Led Display,
VBI Teletext,
SMPS suitable for extreme working conditions,
Hardware and software watchdog,
Voice language selection,
Software installation from USB
The IRD (Integrated Receiver Decoder) is a professional satellite receiver especially used by broadcaster companies. The product can be optionally equipped with XLR, ASI, SDI, aES, EBU, CI, Ethernet. It is possible to manage products remotely via Ethernet. In addition, NMS (NETA Management System) software is controlled from a single point of devices working in different places.
|
DRX9200 Professional IRD Receiver |
|
|---|---|
|
RF Characteristics |
|
| Standard | DVB-S,DVB-S2 |
| Demodulator | QPSK (DVB-S), 8PSK |
| Input Connector | F type (female), 75 Ohm |
| Loop Connector | F type (female), 75 Ohm |
| Frequency Range | 950-2150 MHz |
| Symbol Rate | 1-45 Msymbol/sec |
| FEC/QPSK |
S1-QPSK : 1/2, 2/3, 3/4, 5/6, 7/8 S2-QPSK : 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 8/10 S2-8PSK : 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 automatic selection |
| LNB Supply | 13/18V or off |
| 22KHz Tone | On/Off |
| DiSEqC | 1.1 |
| Input Level | -65dBm to -25dBm |
| VIDEO DECODER | |
| Video System | PAL, NTSC, SECAM |
| SD Decoder (4:2:0) | MPEG2 MP@ML (SD) |
| HD Decoder (4:2:0) | MPEG4 MP@L4.1 ve HP@L4.1 (H264 HD), MPEG4 MP@L3.1 (H264 SD) MPEG2 MP@HL (HD), MPEG2 MP@ML (SD) |
| VIDEO OUTPUT | |
| Video Format | Composite PAL/NTSC/SECAM |
| Output Level | 1 Vpp Adjustable |
| Output Impedance | 75 Ω |
| Chroma-Luma Gain | < 5 % |
| Chroma-Luma Delay | < 25 ns |
| Nonlinear Luminance | < 4 % |
| Main Connector type | BNC, female |
| Monitor Connector type | BNC, female |
| AUDIO DECODER | |
| Decoder | MPEG-1 Layer I, II |
| Mode | Mono, Dual Mono, Stereo |
| Sampling Speed | 32, 44.1 ve 48KHz |
| Output Control | +18dBm max. (@600 Ω, adjustable) |
| Connectors | Dual XLR (male type) |
| Output Type | Electronically balanced |
| Frequency Range | 20Hz to 20KHz |
| Frequency Flatness | <1dB |
| Harmonic Distortion | < 0.5% |
| S/N Ratio | > 60dB |
| Crosstalk | > 60dB |
| ETHERNET CONNECTION | |
| Protocol | TCP/IP |
| Connector | RJ 45 |
| Data Rate | 10/100 Mbps |
| AES/EBU AUDIO OUT | |
| Connector Type | XLR tipi (erkek) |
| Mode | Mono, Dual Mono, Stereo |
| Sampling Speed | 32, 44.1 ve 48KHz, Adjustable |
| Impedance | 110 Ω |
| ASI OUTPUT | |
| Connector Type | BNC type |
| Data Rate | 270Mbit/sec |
| Package type | 188 byte |
| BISS Decoding Mode | Mode-1 |
| BISS Program Decoding | 1 program can be selected from TS (max 4 programs.) |
| HD-SDI/SD-SDI OUTPUT | |
| Connector Type | BNC type |
| Data Rate | 1.485Gb/s |
| Embedded Data | Audio Channel |
| POWER SOURCE | |
| Supply Range | SMPS, 220 VAC ±20%, 50Hz |
| Power Consumption | 30W |
| PHYSICAL and ENVIRONMENTAL VALUES | |
| Cabin | 19“ 1RU |
| Dimensions | 44.5mm (1RU) x 480mm x 240mm |
| Weight | 2800 gr. |
| Operating Temperature | -10 ~ +50°C |
| Cooling | Built-in Fan |
Download DRX9200 Datasheet
ARX890 PROFESSIONAL AUDIO RECEIVER
DVB-S / S2 compatible,
SCPC / MCPC support,
BISS Mode-1, Mode-E,
RDS data output,
2x16 character LCD Display,
Front Panel Keypad,
POWER, LOCK and ALARM Led Display,
SMPS suitable for extreme working conditions,
Hardware and software watchdog,
Software installation from USB,
Professional Audio Receiver is a device that is used for receiving SCPC narrow band audio broadcasts at low speeds between 120-1500. In addition, NMS (NETA Management System) software is used to control devices from different locations from a single point.
|
Professional Audio Receiver |
|
|---|---|
|
RF CHARACTERISTICS |
|
| Standard | DVB-S,DVB-S2 |
| Demodulator | QPSK (DVB-S), 8PSK |
| Input Connector | F type (female), 75 Ohm |
| Loop Connector | F type (female), 75 Ohm |
| Frequency Range | 950-2150 MHz |
| Symbol Rate | 128 ksymbol/sec – 1500 ksymbol/sec |
| FEC/QPSK |
S1-QPSK : 1/2, 2/3, 3/4, 5/6, 7/8 S2-QPSK : 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 8/10 S2-8PSK : 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 automatic selection |
| LNB Supply | 13/18V or off |
| 22KHz Tonu | On / Off |
| DiSEqC | 1.1 |
| Input Level | -65dBm... -25dBm |
| AUDIO DECODER | |
| Decoder | MPEG-1 Layer I, II |
| Mode | Mono, Dual Mono, Stereo |
| Sampling Speed | 32, 44.1 ve 48KHz |
| Output Control | +18dBm max. (@600 Ω, adjustable) |
| Connectors | Dual XLR (male type) |
| Output Type | Electronically balanced |
| Frequency Range | 20Hz to 20KHz |
| Frequency Flatness | <1dB |
| Harmonic Distortion | < 0.5% |
| S/N Ratio | > 60dB |
| Crosstalk | > 60dB |
| ETHERNET CONNECTION | |
| Protocol | TCP/IP |
| Connector | RJ 45 |
| Data Rate | 10/100 Mbps |
| POWER SOURCE | USB or ethernet |
| Supply Range | SMPS, 220 VAC ±20%, 50Hz |
| Power Consumption | 30W |
| PHYSICAL and ENVIRONMENTAL VALUES | |
| Cabin | 19“ 1RU |
| Dimensions | 44.5mm (1RU) x 480mm x 240mm |
| Weight | 2800 gr. |
| Operating Temperature | -10 ~ +50°C |
| Cooling | Built-in Fan |
Download ARX890 Datasheet